How Easily to Remove Mold from Washing Machine?

How easily to remove mold from one of the most often used appliances in our homes? We often neglect the washing machine and we don’t clean or disinfect it. Therefore, we create the perfect environment for bacteria and mold. Maintaining the washing machine is very important for the smell of our clothes.

Remove Mold

At the beginning, it might be hard to notice but the mold gradually builds up unpleasant odors.

Also, if you look at the rubber lining that seals the doors on your machine, you’ll find a build up of moisture and fungi that helps cause this problem.

Luckily, we don’t need to buy cleaning products or aggressive chemicals to prevent odors in the washing machine.

The following recipe is an effective trick that will leave it as good as new without spending more money.

Remove mold from the washing machine:

hydrogen peroxide

What do we need?

  • 3 liters of water
  • 1 cup of hydrogen peroxide (250 ml)
  • 1/2 cup of lemon juice (62 ml)

How to make it?

In a bucket add the three liters of water. Stir in the hydrogen peroxide and lemon juice. Then follow the steps below to leave your washing machine looking free from that unpleasant smell.

  1. First: Clean the rubber seal

The rubber seal around the door is the first place you need to clean to remove mold. Look carefully so you know how it’s installed and what to do to move it.

Spray some of the disinfectant that you have prepared on every place you see moisture built up beneath the seal. Rub it vigorously with a sponge or clean cloth.

Do this all the way around the seal to make sure there are no traces of mold remaining. When you’re all done, spray it once more with the disinfectant. Then wipe it with a dry cloth to remove any excess.

  1. Second: Remove mold from the washer drum and hoses

detergent

Now when the rubber seal is mold free and clean, it’s time to rinse the hoses and drum to make sure that they’re 100% odor-free and clean.

Remove any clothing you have in the machine and then pour the natural disinfectant into the detergent compartment. Then put the program of the washing machine that can run a long cycle with hot water.

  1. Next step: Avoid more mold

washing machine

Once you have clean and smelling fresh washing machine it will be easier to maintain that “look” and keep it from accumulating any unpleasant odors and mold.

If the mixture doesn’t work well enough for you, you can also try the following one:

Ingredients

  • Bleach (as needed)
  • White vinegar (250 ml)
  • Hot water (1 liter)
  • Spray bottle
  • Rubber gloves
  • A soft cloth

 

What to do?

  • Run a wash cycle using a little bleach and hot water. The amount of bleach will depend on the size of your washing machine.
  • Mix one part bleach to four parts water and one part white vinegar in a separate container. Pour it into a spray bottle. Spray the rubber seals and the door of the machine, and anywhere that moisture appears.
  • Use rubber gloves to protect your hands and also use the cloth to wipe all of the surfaces.

Removing mold from the washing machine isn’t as complicated as we have thought. We can easily do that without using harmful chemicals.

 

 

Source: StepToHealth

Print Friendly, PDF & Email

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *